MW0JZE-HEXBEAM-MOUNTING.jpg

 

There are three primary ways in which to mount your MW0JZE - G3TXQ Hexbeam

  1. Directly into the rotator, this is by far the easiest but I would recommend a fairly robust rotator.
  2. On top of a stubmast in a cage, this has the advantage of being able to use a slightly lighter weight rotator as you can support the stubmast in a bearing arrangement on top of the cage. The Hexbeam has a low wind load of approx 5 sq feet so not much force on the rotor when placed in a cage
  3. Clamped to the side of another vertical pole using vertical pole clamps. This is a fast way to mount the MW0JZE - G3TXQ Hexbeam while portable, fast and cheap!!! Click here to purchase the clamps in the UK or just Google Shelly clamps, they are fine for the job.
Top

Contact Us

Contact Ant MW0JZE

Manufacuring Hexbeams Since July 2009

G3TXQ Hexbeams Trading as Hexbeam UK since 31st March 2013

45 Amanwy Bryn Llanelli SA14 9AH

+44 (0)1554 785 002
mw0jze@g3txq-hexbeam.com

Connect With Us

 

 

Payment Methods

payment methods