Mounting Suggestions for the MW0JZE - G3TXQ Hexbeam

There are three ways in which to mount your MW0JZE - G3TXQ Hexbeam

1. Directly into the rotator, this is by far the easiest but I would recommend a fairly robust rotator.
2. On top of a stubmast in a cage, this has the advantage of being able to use a slightly lighter weight rotator as you can support the stubmast in a bearing arrangement on top of the cage. The Hexbeam has a low wind load of approx 5 sq feet so not much force on the rotor when placed in a cage
3. Clamped to the side of another vertical pole using vertical pole clamps. This is a fast way to mount the MW0JZE - G3TXQ Hexbeam while portable, fast and cheap!!! Click here to purchase the clamps in the UK or just Google Shelly clamps, they are fine for the job.