![]() |
Six Band G3TXQ Broadband Hexbeam If you prefer to build your own G3TXQ Broadband HEXBEAM please see the parts I can supply below £500 Call for shipping Costs |
![]() |
1:1 Common mode in-line Isolator/Balun 8 Turns of RG 142 high power coax
FT 240-31 Amidon Torriod PTFE SO 239 Chassis sockets Encapsulated in Epoxy Resin for watertight finish Will handle above 1.5KW Housed in a 10cm x 10cm x 5cm plastic box You will need to supply the pigtail, feed as close to the 20m feed-point as possible, I recommend 50cm and attach the balun to the back of the centre-post.
£50 Call for shipping Costs |
![]() |
1:1 Common mode Ferrite Bead Balun Beads Fitted to 1Metre of RG 213 Mil spec Coax
6 x FB 31-1020 Ferrite Beads PL 259 and SO 259 fitted to one end with split coax feed on other end waterproofed with heat-shrink and hot glue Click here and view video number 11 for more info £35 Call for shipping Costs |
If you would like to build your own G3TXQ Broadband Hexbeam I can also supply the parts below to order
![]() |
Hexbeam Hub £65.00 Call for shipping Costs |
![]() |
|
Six Band Hexbeam Centre-Post £160.00 Call for shipping Costs |
|
Picture to come
|
|
Hexbeam Spreaders 6 X 1.5m 22mm OD £220.00 Call for shipping Costs |
![]() |
|
Hexbeam Wire Elements 20M = £23.00 Element construction Each element is formed from 7 strand PVC coated copper wire and is configured as driven Element, spacer cord, reflector element, spacer cord to driven element All elements are cut to size , just plug and play, no cutting or tuning required. Full 6 Band Set £100.00 Call for shipping Costs
|
Wire element fixings.
The below will allow you to fix the wire elements to your spreaders, you will need 6 for each band that you have on your Hexbeam, all fixings are stainless steel.
![]() |
Wire element clip to fit 12mm OD tubing Comes complete with D-Loop and stainless steel fixings. You will need 6 of these for each band of your Hexbeam. PLEASE make sure you have the correct size for your spreaders
£5.00 A Set of 6 |
![]() |
Wire element clip to fit 17mm OD tubing Comes complete with D-Loop and stainless steel fixings. You will need 6 of these for each band of your Hexbeam. PLEASE make sure you have the correct size for your spreaders
£5.50 A Set of 6 |
![]() |
Wire element clip to fit 22mm OD tubing
Comes complete with D-Loop and stainless steel fixings. You will need 6 of these for each band of your Hexbeam. PLEASE make sure you have the correct size for your spreaders
£6.00 A Set of 6 |
Hexbeam Bags for Portable Use Or For Storage.
![]() |
|
|
150cm x 30cm x 15cm Bag to fit Hexbeam Shipping Box |
|








